Kacise-Water Quality Monitor

First, let’s understand the basics of turbidity. 1. Introduction to turbidity Natural water and wastewater contain a variety of insoluble substances of different particle sizes, such as soil, fine sand, organic matter and microorganisms, which can cause turbidity. The degree of turbidity of the water sample can be expressed by the magnitude of the turbidity. …

Can the internal turbidity sensor of COD254 be used as the output of standard turbidity? Read More »

Ammonia nitrogen refers to the nitrogen in ammonia or ammonium state in water, which is one of the important indicators of eutrophication and pollution of water bodies. There are many methods for the determination of ammonia nitrogen, and this article will introduce five commonly used methods, namely Nessler’s reagent spectrophotometry, salicylic acid-hypochlorite spectrophotometry, distillation-neutralization titration, …

What are the ammonia nitrogen test methods Read More »

According to the “Hygienic Standard for Drinking Water” (GB5749-2006), the residual chlorine content of the factory water is ≥ 0.3mg/L, and the residual chlorine concentration of the water at the end of the pipe network is ≥0.05mg/L, which is not harmful to the human body. Although the residual chlorine of the latter still has the …

What are the residual chlorine test methods? What are the pros and cons of each? Read More »

In the case of continuous use, on-line residual chlorine analysis will inevitably encounter zero drift, system contamination, and interference factors caused by changes in sample flow rate, pH, temperature, etc., especially the residual chlorine concentration at the end of the pipe network is very low, and the residual chlorine content in the water is only …

What factors affect the results of residual chlorine testing? Read More »

Item comparison Electromagnetic Flowmeter Ultrasonic Flow Meter working principle Faraday’s law of electromagnetic induction Time difference between forward and reverse flow of ultrasonic waves measurable range Liquid with conductivity ≥5uS/cm Liquid, gas and steam can be measured installation method Tube type/plug-in type Pipe section/plug-in/clamp-on installation conditions Closure installation Installation under pressure installation cost high Low …

electromagnetic flowmeter VS ultrasonic flowmeter Read More »

Communication interface: support RS485 communication interface, Modbus-RTU protocol.Physical interface: The standard M20 industrial interface seamlessly connects with instrumentation equipment.Material: High-strength 304 stainless steel shell, dustproof and explosion-proofRemote transmission: It comes with remote wireless transmission and seamlessly connects with Feilian cloud platform.Software features: Support PC and mobile phone to directly view data.Protection class: Industrial protection class …

Radar level sensor 4G wireless remote transmission 485 protocol Read More »

Product Overview:In the process of industrial automation control, material level is an important parameter. There are many methods of material level measurement. For different working conditions and media, material level gauges with different measurement principles can be used for measurement, such as static pressure type, float type, heavy hammer type, ultrasonic and other common material …

433M Wireless Radar Technical Solution Read More »

“Low dielectric constant liquid measurement, not suitable for radar level gauge”. Inadvertently, we hear this all the time. In fact, when I first entered the industry, I thought so too. After a long time and understanding more, I realized that this statement is a bit one-sided. Let’s discuss it in detail. What Is Dielectric Constant? …

Influence of Dielectric Constant on Radar Level Meter Read More »